Materials · 星辰 7502
OM7502
Wet-process, amine-resistant FFKM for chemical delivery, filters and flow meters — up to 230 °C.
Properties
ASTM methods, stated conditions
- Hardness
- 75 Shore A (ASTM D2240)
- Tensile strength
- 20.3 MPa (ASTM D412)
- Elongation at break
- 346 % (ASTM D412)
- Compression set
- 19.6 % (ASTM D395 Method B, 70 h @ 200 °C, 25 % deflection, Type B)
- Service temperature
- -10 °C to +230 °C
- Process compatibility
- Dry
- Seal type
- Static + Dynamic
- Colour
- Black
Read the compression set with its condition — 23 % measured at 300 °C tells you nothing about performance at 200 °C. Every figure on this site is published with the temperature and duration it was measured at, so you can compare grades on the same basis.
Typical applications
Wet process, door and lip seals, filters, flow meters, chemical tanks
Comparable grades
Cross-reference
| Grade | Hardness | Service temp. | Comp. set | Why we pair them |
|---|---|---|---|---|
| Chemraz® 505 | 75 Shore A | −30 to +230 °C | 25 % | Same hardness and wet-chemical duty; their lower temperature floor is deeper. |
| Chemraz® 585 | 85 Shore A | −20 to +260 °C | — | Comparable wet-process chemical resistance at a higher durometer. |
Parameter-level comparison only — This pairing is drawn from publicly published hardness, temperature and compression-set figures and is a screening aid, not an equivalence claim. Sealing performance depends on your actual media, temperature, pressure, motion and gland design. Validate with a sample before switching an approved part.
Other grades
Request a quote
Request a quote for OM7502
Six short steps, no account required.
Enquiry received
Your enquiry has been logged. An engineer will come back to you within one business day.
Your reference: —
A copy has been sent to our engineering and sales teams. If you have not heard from us within one business day, reply to the confirmation email quoting the reference above.
Keep browsing gradesNeed help selecting an FFKM compound?
Send your operating conditions or a drawing and our engineers will recommend a grade and confirm availability.